Design confirming to GMP norms.
Model available ranging from 5Kgs. To 300kgs.
Bucket type bottom chamber above ground level.
Intrinsically safe earthing arrangement.
Air filteration supplied with 20 micron washable filter followed by 5 micron Microvee filter & finally air is passes through 0.3 micron Hepa Filter (Optional)
Differential pressure gauges to monitor pressure drop across inlet filters and air filters.
Clean in Place systems for washing down during product changes.
On line sampling facility.
Pneumatically Operated system for lifting & sealing of Product Container.
Product container lifting platform and air cylinder replaced by pneumatically operated gasket. (Optional)
Inflatable gasket system for sealing lifting platform with bottom jack chamber instead of bottom bag. (optional)
PP Finger bag fitted with the help of inflatable silicon rubber tube.
Automatic pneumatically operated shaking system with timer & butterfly valve.
Fully sealed air control damper with positional for accurate air monitoring.
Solid flow chart monitor for detection of torn finger bag also available, which automatically STOP the machine blower if it detects any particle escaping from torn finger bag towards exhaust.
Rear chamber with heating coils and air inlet filter modules to be mounted in remote areas
Fan motor unit to be mounted in remote areas.
Stainless steel interconnecting duct lines with flanges for connecting remote mounted heating and fan motor modules.
Noise level below 90 DB with specially designed silencer
Microprocessor based control panels with key board, display unit & printer.

*Container volume is based on a fifty percent fill with 0.6 bulk density product.