RAPID MIXER GRANULATOR
INTRODUCTION:

Pharma Tech mixer is designed to meet special needs of tablet manufacturing technology. This is achieved by reducing processing time, more homogenous mixing, uniformity of Granule size and above all maintaining improved hygienic standards within the highest GMP norms

cGMP : MIXER is designed to achieve all the requirements of cGMP - Current Good Manufacturing Practices. The components are easily dismantable, can be cleaned thoroughly and assembled in quick time. The shaft seals are very effective to check any leakages and cross contamination due to adherants. The bowl and all the components are of highly polished Stainless Steel and without sharp corners or crevices.

SALIENT FEATURES:

Model available from 25 ltrs. to 1000 ltrs. Capacity.
Can be used in the fields of Pharmaceuticals / Bulk Drugs and processing of special food stuffs.
Short batch time & reduced cleaning time.
The seal housing and drive may be flushed with cleaning water, which is then drain away from the machine through built in drain fubes.
Enclosed moving parts. Maximum care has been taken to ensure machine safety.
Air purge sealing for main shaft and granulator shaft.
Auto/Manual Controls.
System control ranges from simple manual push button control to full programmable logic controller (PLC)based automation.
GMP/Flameproof/S.S.316 construction on demand.
Discharge provided on either side to suit Client's requirement.
Steam Jacketed drying also available on request to meet specific process requirements.



OPTIONAL ATTACHMENTS :

Programmable logic controller (PLC) for automation upto printout stage.
Jacketed vessel for heating or cooling.
Binder solution adding and cleaning in place (CIP) in built.
Variable speed drive for main and chopper impeller.
Impeller lifting device
Powered main lid opening.

Technical Specifications
Capacity In Litres
10
25
50
150
250
400
600
750
900
1200
Overflow Vol. Lts.
10
25
50
150
250
400
600
750
900
1200
Working Vol. Lts.
8
20
40
120
200
320
480
600
720
960
Capacity of Wet Gran
4Kgs
10-12
Kgs
20-22
Kgs
60-65
Kgs
100-110
Kgs
160-180
Kgs
240-260
Kgs
300-320
Kgs
360-380
Kgs
480-500
Kgs
Overall Dimensions
Length (mm)
1250
1750
1950
2450
2700
2850
2900
3100
3150
3400
Width (mm)
550
950
1500
2000
2150
2400
2500
2600
2700
2800
Height (mm)
1350
1600
1800
2050
2100
2100
2250
2750
2800
2900
Appox Net Wt. in Kgs
200
320
540
1600
2450
2700
3250
3900
4200
4850


DRY MIXING
WET GRANULATION
DISCHARGE
Charge dry powders into the mixer cone and mix it for 2-3 minutes to obtain a homogeneous mix.
Add granualtion fluid to the pre-mixed powders and obtain granulation in 3 to 10 vminutes depending on formulation.
Empty out the granules from the mixer cone in 30 seconds by opening the discharge port with the main agitator moving slow speed.